Warner-electric MCS2000-PSDRV2 User Manual

MCS2000-PSDRV2 Power Supply/DualVoltage/Dual Channel DriverInstallation & Operating Instructions819-0525P-2010-7

10Warner Electric • 800-825-9050 P-2010-7 • 819-0525Note: Warner Electric Tension brakes are notpolarity sensitive, so wiring betweenterminals on the

11Warner Electric • 800-825-9050 P-2010-7 • 819-0525System Start-Up 24 Volt Systemo 1. Prior to applying power, double check allwiring between Tension

12Warner Electric • 800-825-9050 P-2010-7 • 819-0525when anti-residual current is applied to the brake.o 5. Adjust the anti-residual output for Channe

13Warner Electric • 800-825-9050 P-2010-7 • 819-0525The following LED indications will be presentwhen anti-residual current is applied to the brake.o

o 4d. Now slowly adjust the anti-residualpotentiometer “A” clockwise whilefeeling the reaction on the brake.When the optimum anti-residualoutput is ob

output is obtained, the brake will bevery free to rotate without muchresistance. This is best if done atcore diameter.Note: Using a meter across the b

16Warner Electric • 800-825-9050 P-2010-7 • 819-0525operate in the 0 to 24 volt range, butthe overexcitation level from 24 voltsto 48 volts is not ava

17Warner Electric • 800-825-9050 P-2010-7 • 819-0525LED’s Green Green Red Red ON ON ON ON OFF OFF OFF OFF LED Operation Functional Description MCS2000

18Warner Electric • 800-825-9050 P-2010-7 • 819-0525The following chart shows a comparison of the MCS2000-PSDRV, MSC2000-PSDRVH and theMCS2000-PSDRV2

19Warner Electric • 800-825-9050 P-2010-7 • 819-0525Symptom Possible SolutionNo Output to BrakeCheck LED’s for various conditions.Check incoming DC po

2Warner Electric • 800-825-9050 P-2010-7 • 819-0525ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Specifications . .

20Warner Electric • 800-825-9050 P-2010-7 • 819-0525MCS2000-DRV MCS2000-PSDRV2 MCS2000-DRVH MCS2000-PSDRV2REF 10 V0 VIn BxVIn B 0 – 10 V0 VIn AxVIn A

21Warner Electric • 800-825-9050 P-2010-7 • 819-0525Figure DescriptionPageNumberFigure 1 Outline and Mounting Dimensions 4Figure 2MCS2000-ECA to MCS20

Warner Electric LLC31 Industrial Park Road • New Hartford, CT 06057815-389-3771 • Fax: 815-389-2582www.warnerelectric.comWarrantyWarner Electric LLC w

3Warner Electric • 800-825-9050 P-2010-7 • 819-0525SpecificationsModel: MCS2000-PSDRV2 Dual Channel/DualVoltage DriverPart Number: 6910-448-110Power

4Warner Electric • 800-825-9050 P-2010-7 • 819-0525InstallationMountingSelect a location that will allow for sufficient airmovement around the control

5Warner Electric • 800-825-9050 P-2010-7 • 819-0525System WiringControllersThe MCS2000-PSDRV2 will operate with any ofthe MCS2000 series Controllers.

6Warner Electric • 800-825-9050 P-2010-7 • 819-0525Note: Since the MCS2000-CTDA andMCS2000-CTLC controllers have25 pin DB connectors with cableswiring

7Warner Electric • 800-825-9050 P-2010-7 • 819-0525o 1. Connect the brown wire [Channel 1 Out(V)] from the connector cable on theMCS2000-CT controller

8Warner Electric • 800-825-9050 P-2010-7 • 819-0525Power and Brake Wiring24 Volt SystemsUsing The Internal 24V Power Supplyo 1. Wire the positive (+)

9Warner Electric • 800-825-9050 P-2010-7 • 819-0525Brake Brake “A” “B” 24 VoltPowerSupply- DC+DCMSC2000-DRV2“A” AntiresidualChannel A“B” AntiresidualC