Warner-electric MTB-I User Manual download pdf

Servicing the Warner Electric MTB-I

Installation Instructions

P-1397

819-0307

The magnet friction pads and armature are the

wearing parts of the Modular Tension Brake

(MTB). While the wear life is normally many

months, the magnets and/or armature(s) may

eventually require replacement.

Failure to follow these

instructions may result in product damage,

equipment damage, and serious or fatal injury

to personnel.

Replacing the Magnet Friction Pad

The magnet consists of the basic coil housing

and a replaceable friction pad. To replace the

pad, proceed as follows:

1. Shut off power at the control system.

2. Remove the carrier assembly from its bracket

and slide the magnet off the pins.

3. Remove the flat head screw which secures

the pad to the housing, and remove the pad.

(See Figure 1)

Figure 1

4. Install new pad with the new screw provided.

5. Before reattaching the carrier, check the

armature for wear. If the armature is worn to

a thickness of 5/16" or less at the thinnest

section, it must be replaced. If it is more than

5/16" it may be used as is with the new

magnet. (See Figure 2) A used armature

should not be resurfaced even though it may

have a wear pattern from previous use.

Figure 3

Figure 4

Figure 2

To replace the armature first remove other

components as required to allow removal of

the armature from the hub and shaft. Install

the new armature and other components,

including the magnets and carrier, in reverse

order.

6. Adjust the armature(s) on the shaft for

proper magnet-to-carrier clearance of .200

inch. See Figures 3 and 4 for single or dual

armature units.

Warner Electric 800-825-9050

1 2

Installation Instructions 1
Warranty 2

Summary of Contents

Page 1 - Installation Instructions

Servicing the Warner Electric MTB-IInstallation InstructionsP-1397819-0307The magnet friction pads and armature are thewearing parts of the Modular Te

Page 2 - Warranty

WarrantyWarner Electric LLC warrants that it will repair or replace (whichever it deems advisable) any product manufactured and sold by it which prove

Comments to this Manuals

No comments

Warner-electric MTB-I User Manual

Browse online or download User Manual for Hardware Warner-electric MTB-I. Warner Electric MTB-I User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Warner-electric MTB-I